Car Cable and Link CableUpdated a year ago
![]()
| ||||
![]() | ||||
![]() | ||||
![]() 4. Secure the tire chains on the inner sidewall, or the back side of the wheel. Pull the end of the side cables with the knobs up to meet the keyhole latch. Tighten the side cable to remove any slack and thread the knobs through the key hole latch slot. Use only your hands to tighten the cables. You do not need to use any tools. Secure any excess cable to side cable using the clips attached to the side cable. Now begin working on the outer sidewall. Pull the end of the side cable with knobs up to meet the lever lock. Tighten the side cable to remove any slack, then insert the knob into the key hole latch in the lever lock so the cable remains taught. Make sure the cross members are centered over the tire tread. Your may need to readjust the key hole latch on the inner sidewall of the tire to keep the cross members lying straight across the tire tread. | ||||
![]() | ||||
![]() After initial installation, move vehicle forward or backward at least 15 feet and retighten tire chains. Failure to do so may reduce chain life by 50%. | ||||